#751010: High Volume Truck, Pressure Activated, Automatic Shut-Off
VIIIS Nozzle
1" Heavy Duty Diesel Nozzle with Three Notch Hold Open Clip, Metal Handguard and 1808 Waffle Splash Guard, without Spout Bushing
Product Info
Resources
Specs / Construction
Pressure activated, automatic shut-off nozzle with metal handguard for truck stop and other high volume full-service, self-service and unattended stations.high volume full-service, self-service and unattended stations.
Features/Benefits
VIIIS nozzle shuts off when: — the pump shuts off. — the gas tank is full. — the lever is opened before the pump is turned on. — the leak detector has not completed the test cycle.
Optional aluminum bushing retains spout spring and keeps spout from rounding-in: the two leading causes of clicking off and splashback spillage.
Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
StreamShaper® reduces turbulence for straighter fuel flow and less splash
Strong flow (up to 75 gpm / 283.9 Lpm)
Dual poppet design equalizes pressure on both sides of the main poppet valve in order to aid in lifting the lever, and ultimately opening the main poppet valve for full flow.
Optional cold weather seals are rated to -40°F/C.
Optional Gilbarco, Tokheim, and Wayne handguards can be fitted with a magnet to trigger the dispenser’s proximity switch, or can be provided without the magnet for dispensers equipped with a standard “flapper” switch.
Comes standard with smooth full grip guard and 1808 waffle splash guard.
Construction
Body: One piece sand cast aluminum with high-impact metal handguard Seals: Fluorocarbon Packing: Double o-ring seal protected by fiber reinforced Teflon® Lever: One piece contoured steel with hard polymer lever cover Inlet: 1" / 25.4 mm NPT
Flow Rate
Dimensions
Configure a Complete Fueling System
Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.
Add Accessories / Options
Make it an EZ-Connect®
Choose a Swivel
Choose …
000087: 1” M x 1” F NPT Multi-Plane Swivel
000095: 1” M x 1” F NPT 70° Pump Swivel
003395: 1” M x 1” F NPT Multi-Plane Restricted Swivel
004860: 1” M x 1” F NPT Multi-Plane High Flow Swivel
Choose a Safe-T-Break®
Choose …
002276: 1” F x 1” F NPT Reconnectable Safe-T-Break®
005231: 1” F x 1” F NPT Low Pull Reconnectable Safe-T-Break®
005812: 1” F x 1” F NPT Non-Reconnectable Safe-T-Break®
006301: 1” F x 1” F NPT Non-Reconnectable PCC Safe-T-Break®
008331: 1” F x 1” F NPT CK Reconnectable MAGBREAK®
Choose Swivel/STB Combo
Choose …
005969: 1” M NPTF Multi-Plane Swivel connected to 1” F NPT Reconnectable Safe-T-Break®
Choose Spout
Choose …
002279: Complete Spout Assembly with Spout Bushing
003589: Complete Long Spout Assembly with Spout Bushing
005017: Complete Spout Assembly without Spout Bushing
007218: Complete Long Spout Assembly with Spout Bushing
011043: Complete Spout Assembly without Spout Bushing and Small Spout Spring
011129: Complete Long Spout Assembly without Spout Bushing and UL Groove
Specify the components you’ll need, and we’ll create the perfect EZ-Connect for you. Note that all components must be chosen to complete an EZ-Connect System.
Choose a Swivel
Choose …
004860: 1” M x 1” F Multi-Plane High Volume Swivel
Choose a Safe-T-Break®
Choose …
006301: 1” F x 1” F Non-Reconnectable PCC Safe-T-Break®
Choose a Spout
Choose …
003589: Complete Long Spout Assembly with Spout Bushing
Choose a Curb Hose
Choose …
Ready to exceed expectations? Find the nearest distributor to get started.